MSP Export Blog

Knorr-Bremse Air Brake Parts Guide: Valves, Air Dryers, EBS and Compressors

Knorr-Bremse commercial vehicle components cover interconnected pneumatic and electronic systems. A brake valve, air dryer or EBS unit cannot be selected safely from a general vehicle description alone. The complete component number, vehicle application, connector arrangement and system configuration should be checked before ordering.

This guide provides a structured purchasing workflow for the Knorr-Bremse range available from MSP Export. Explore the main KNORR collection, including brake and air valves, air dryers and processing, EBS and ABS electronics, and compressors.

Main Knorr-Bremse product groups

  • Brake and air valves: distribution, foot-brake, relay and control functions within pneumatic braking systems.
  • Air dryers and processing: components that help manage moisture, contaminants and circuit pressure.
  • EBS and ABS electronics: electronic control units and associated brake-system components.
  • Compressors: air-supply components whose application and configuration must match the engine and system.
  • Calipers and slack adjusters: mechanical brake components selected according to the axle and brake application.
  • Brake chambers, filters and coupling heads: supporting components used across commercial-vehicle air systems.

Why air treatment is important

Knorr-Bremse explains that air dryers, air processing units and multi-circuit protection valves are used to keep moisture and contaminants under control while managing the compressed-air supply. Moisture can contribute to corrosion and premature wear, so the condition of the wider air-treatment system should be considered when diagnosing repeated dryer or valve problems.

Replacing only the visible failed component may not address upstream contamination, compressor oil carry-over or a related pressure-control fault. Workshops should follow the official diagnostic and service process for the specific system.

How to identify a Knorr-Bremse component

  1. Record the full Knorr-Bremse number: include suffixes and remanufactured or service identifiers.
  2. Photograph the label and all ports: show pneumatic port numbers, electrical sockets and mounting points.
  3. Provide the vehicle application: make, model, year, VIN or chassis details and engine information where relevant.
  4. Identify the system: state whether the enquiry concerns conventional air braking, ABS, EBS or electronic air control.
  5. Describe the symptom: useful for distinguishing the component being requested, although diagnosis must remain with a qualified workshop.
  6. List quantity and destination: required for stock checking and export logistics.

Catalogue examples include the 0481026023000 air distribution valve and the 0486106008N50 EBS ECU. These examples demonstrate why the complete number and system type are essential.

Brake valves: do not order by port count alone

Two pneumatic valves can have a similar housing and number of ports while using different pressure characteristics, mounting arrangements or vehicle applications. Port markings and connector details should be documented, but they do not replace a part-number cross-check.

EBS and ABS electronics

Electronic braking components require additional care. Hardware references, connector design and vehicle configuration can differ even within the same model family. Coding, calibration and fault diagnosis should be performed using the appropriate service equipment and official documentation. An electronic unit should never be replaced solely because a fault code mentions it; wiring, power supply, sensors and pneumatic conditions may also be involved.

Compressors and air-supply components

For compressor enquiries, provide the complete number, engine application, mounting orientation and photographs of the ports and drive arrangement. When the air system shows oil, moisture or slow pressure build-up, the complete air-supply and treatment path should be evaluated by trained personnel.

A B2B procurement checklist

  • Create one spreadsheet row per part number.
  • Add vehicle, system, quantity and destination data.
  • Attach label and connector photographs using matching file names.
  • Separate confirmed references from numbers requiring cross-reference work.
  • Request related filters, cartridges or service components in the same enquiry.

MSP Export can support multi-reference quotations, collection consolidation and worldwide shipment. Browse Knorr-Bremse commercial vehicle parts or submit your list through our RFQ page.

Safety note

Braking and compressed-air systems are safety-critical. Diagnosis, installation, coding and testing must be performed by qualified technicians following current Knorr-Bremse and vehicle-manufacturer procedures. This guide is for identification and procurement support, not a repair manual.

Official technical sources

¿Necesita ayuda para encontrar la pieza correcta?

Envíenos códigos OEM, fotos de productos o referencias de marca. Nuestro equipo le ayudará a identificar la pieza correcta.

Consultar por WhatsApp Enviar email